Sensor
|
Description
|
Ranges of measurement
|
Resolution
|
Accuracy
|
Part No.
|
Accessories
|
DC1 |
Sensor for measuring
direct voltage. Three ranges of measurement. Signal input via BNC jack |
0..200,00 mV / 2,0000 V / 20,000 V |
10 µµV |
±0,3 % o.m.v.
±0,05 % o.f.v. |
1003 |
BNC adapter on 1 x banana jack (part No. 2000)
BNC adapter on 2 x banana jack (part No. 2001) |
COUNT |
Pulse and frequency counter for TTL input signal, Signal input via BNC jack |
0..750 kHz |
0,1 Hz |
|
1040 |
BNC adapter on 1 x banana jack (part No. 2000)
BNC adapter on 2 x banana jack (part No. 2001) |
MF |
Sensor MF for monitor frequency |
0..100 kHz |
0,1 Hz |
|
1042 |
|
UMP
 |
Optical recording of speed
and events, sensitivity of the red light scanner via potentiometer can be set, scope of coverage 20..100 mm |
0..20000 UpM |
1 UmP/Imp |
|
1045 |
|
TTL16 |
Digital sensor with 16 TTL inputs, provides 5V supply output. Input via 34-pin multi-point connector. |
16 x TTL |
|
|
1050 |
Adapter of contact strip on 34 clamp-type test tips, cable length 0,8 m (part No. 2020) |
OPTO16 |
Digital sensor with 16 Opto-coupler inputs, all inputs galvanically separated, input via 34-pin multi-point connector |
16 x opto-coupler input 5..24 V |
|
|
1051 |
Adapter of contact strip on 34 clamp-type test tips, cable length 0.8 m (part No. 2020) |
ME1 |
Field strength sensor for recording alternating magnetic and electric fields ranging from 16 Hz to 100 kHz, band-pass filter up to 400Hz in 18.7 Hz steps, real
effective-value rectification (TRMS) according to TCO and German Federal Immission Control Act (BimSchG) |
0..200,0 nT/
2000 nT / 20,00 µT
0..20,00 V/m / 200,0 V/m / 20,00 kV/m
(with pre-defined measuring method) |
0,1 nT
0,01 V/m |
±5 % o.m.v.
±10 % o.m.v |
1060 |
Earthing cable 10m (part No.: 0120) |
ME2 |
Field strength sensor for recording alternating magnetic and electric fields ranging from 16 Hz to 100 kHz, band-pass filter up to 400 Hz in 16.7 Hz steps, real effective value rectification (TRMS) according to TCO and German Federal Immission Control Act (BImSchG) |
0..2000 nT / 20,00 µT
/ 200,0 µT
0..200,0 V/m / 2000 V/m / 20,00 kV/m
(with pre-defined measuring method) |
1 nT
0,1 V/m |
±5 % o.m.v.
±10 % o.m.v. |
1061 |
Earthing cable 10m (part No.: 0120) |
MAG3 |
Isotropic field strength sensor for recording alternating magnetic fields ranging from 5 Hz to 400 kHz, four filtering functions, 100 cm2 coil surface according to DIN 0848, real effective-value rectification (TRMS), display of the total flux density and the three field vectors |
0..200 nT / 2000 nT / 20,00 µT |
0,1 nT |
±2,5 % o.m.v.
(50 Hz; 50% rH) |
1063 |
|
ETCO |
Field strength sensor for recording alternating electric fields according to TCO directive, frequency range 5 Hz..400 kHz, frequency filter for band I/II, real effective-value rectification (TRMS) |
0..20,00 V/m / 200,0 V/m / 2000 V/m |
0,01 V/m |
±2,5 % o.m.v.
(50 Hz; 50% rH) |
1065 |
Earthing cable 10m (part No.: 0120) |
EFI3 |
Isotropic field strength sensor for recording alternating electric fields, potential-free
operation via fibre-optic cable, frequency range 5 Hz to 100 kHz, three filtering functions, Display of the total field strength and the three field vectors |
0..10,0 V/m / 100V /m / 1000 V/m |
0,1 V/m |
<±5 % o.m.v.
(50 Hz; 50% rH) |
1068 |
Interface adapter EFI3 incl. fibre optics (5m) for Sensor 3D-EFM produced by the company ROM-Elektronik (part No. 1067) |
HF1 |
Sensor for high-frequency electromagnetic radiation, for LogPer antenna, compensated
frequency response, high resolution of 10 nW/m2, Sensor for high-frequency electromagnetic radiation, for LogPer antenna, compensated
frequency response, high resolution of 10 nW/m |
Art-Nr.: 1070
0..100 µW/m2 / 100 mW/m2 RMS
0..100 µW/m2 / 100 mW/m2 Peak
Art-Nr.: 1071
0..200 mV/m / 6,00 mV/m RMS
0..200 mV/m / 6,00 mV/m Peak
|
10 nW/m2
10 nW/m2
1 mV/m
1 mV/m |
for both measurement channels:
±3 dB
(500 MHz..1,8 GHz)
±10 dB
(250 MHz..2,5 GHz) |
1070
1071 |
LogPer antenna 550 MHz..3 GHz (part No. 2300)
LogPer antenna 250 MHz..3 GHz (part No. 2301)
LogPer antenna 850 MHz..3 GHz (part No. 2302)
30dB attenuator 0..6 GHz, ±0,3 dB (part No. 2310)
High-frequency filter MFF-1 (part No. 2320) |
ENB |
Magnetic field sensor ENB for measurement according to EN 50366.
Frequency range: 10 Hz - 400 kHz |
0..200%
0..2000%
|
0,1%
1% |
5% [50Hz] ±2dB |
1092 |
|
THJ |
Temperature sensor for Thermocouple sensor type J (Fe-CuNi), to be calibrated, connection of sensor via miniature thermal connector |
-100,0..+700,0 ºC |
0,1 ºC |
±0,5 ºC ±0,5
% o.m.v. Temperature coefficient
0,025 °C/°C |
1100 |
Thermal connector type J (part No. 2030) |
THK |
Temperature sensor for Thermocouple sensor type J (Fe-CuNi), to be calibrated, probe connection via a miniature thermal connector |
-100,0..+1200,0 ºC |
0,1 ºC |
±0,5 ºC ±0,5
% o.m.v. Temperature coefficient
0,025 °C/°C |
1101 |
Thermal connector type K (part No. 2040),
Immersion probe type K (part No. 2050),
Insertion probe type K (part No. 2055),
Air probe type K (part No. 2060),
Infrared probe for THK (part No. 2070) |
P100 |
High-precision temperature sensor for Pt100 probe in 4-wire configuration (2/3-wire configuration also possible), to be calibrated, connection of sensor via
a connector 719 (1 unit included in scope of delivery) |
-200,0..+800,0 ºC |
0,1 ºC |
±0,2 ºC ±0,5
% o.m.v |
1116 |
Connector 719
4-pin (part No. 2080),
Immersion probe Pt100 (part No. 2085) |
HT1 |
Compact measuring probe for measuring relative air humidity and temperature, high chemical
resistance and long-term stability, humidity resistance, to be calibrated (see accessories) |
0..100,0 % r.H
-20,0..+60,0 ºC |
0,1 % r.H
0,1 ºC |
± 3 % r.H.
± 0,7 ºC (bei 20 ºC) |
1126 |
Humidity calibrating device for HT1 (part No. 2100),
Humidity standard measure 80% rH, 5 ampoules (part No. 2105),
Other humidity standard measures upon request, calibration service provided by the manufacturer |
PRD10/PRD100/PRA2000 |
Sensor for differential or absolute pressure, for non-ionic and not corrosive media,
hose connection 4 mm |
0..10 mbar differential pressure (PRD10)
0..100 mbar differential pressure (PRD100)
0..2000 mbar absolute pressure (PRA2000) |
0,01 mbar
0,1 mbar
1 mbar |
±0,05 mbar ±0,2% o.m.v.
±0,5 mbar ±0,2% o.m.v.
±2 mbar ±0,15% o.m.v.
Temperature coefficient: 0.15% 0,15% o.m.v./ºC |
1142
1143
1145 |
Pressure hose polyurethane 4/6 mm (part No. 2120) |
AF1 |
Air flow sensor with
aerodynamically optimised "streamline" measuring sensor, precision bearing with dust cover, 22 mm Head diameter |
0..20,00 m/s |
0,01 m/s |
±0,1 m/s ±1,5 % o.m.v. |
1162 |
Spare snap head upon request |
O2 |
Sensor for measuring
the oxygen concentration in air, to be calibrated, operating life of the measuring cell 2 years, drift typically <2 %/2 years |
0..25,0 % O2 |
0,1 % O2 |
±0,5 % O2 after calibration (0..40 ºC) |
1175 |
Calibration gases and replacement measuring cells upon request |
| O3 |
Sensor for measuring
the ozone concentration in air, to be calibrated, operating life of the measuring cell more then 18 months, drift typically <10 %/6 months |
0..1000 ppb O3 |
1 ppb O3 |
±30 ppb O3 ±20 % o.m.v. after calibration (20 ºC; 50% rH) |
1177 |
replacement measuring cells upon request |
CO |
Sensor for measuring the carbon monoxide concentration in air, to be calibrated, operating life of the measuring cell 2 years, drift <5 %/year |
0..500 ppm CO |
1 ppm CO |
±3 ppm CO ±5,0 % o.m.. after calibration (0..40 ºC) |
1179 |
Calibration gases and replacement measurement cells upon request |
| CO2 |
Sensor for measuring the carbon dioxide concentration in air, optical measuring, to be calibrated, operating life of the measuring cell more then 5 years, drift <150 ppm/year |
0..5% ppm CO2 |
0,01% CO2 |
±100 ppm CO2 ±2 % o.m.v. after calibration (0..40 ºC) |
1180 |
Calibration gases and replacement measurement cells upon request |
CHEM1 |
Sensor for measuring
temperature, pH value, redox voltage and conductance, Potential separation for UMS4, automatic temperature compensation, to be calibrated, connection of the electrodes via BNC jack |
-50,0..+100,0 ºC
0..14,00 pH
-2000..+2000 mV
0..200,0 µS / 2000 µS / 20,00 mS |
0,1 ºC
0,01 pH
1 mV
0,1 µS |
±0,2 ºC ±0,5 % o.m.v.
±0,1 pH ±2,0 % o.m.v.
±0,5 % o.m.v.
±2,0 % o.m.v. |
1200 |
Coaxial connecting cable for S7 plug head connector (part No. 2200),
temperature sensor Pt1000L with S7 plug head connector (part No. 2210),
pH electrode EGA133L with S7 plug head connector (part No. 2220),
redox electrode EMC133L with S7 plug head connector (part No. 2230),
conductance cell LTG1/24 with S7 plug head connector (part No. 2240),
various solutions see price list
|
LUX |
Precision sensor for measuring illuminance, spectral adaptation according to evaluation function V (Lamda), accuracy class DIN 5032 Class B |
0..2000 lx / 20,00 klx / 200,0 klx |
1 lx |
DIN 5032 class B
V (Lambda) adaptation: f1 smaller 5%
Cosine matching: f2 smaller 3% |
1220 |
|
